Improve the Design Ability of Sheet Metal Parts
Engineers and designers must ensure that the CAD system they purchase is compatible with the current program. If not, they may start from scratch. The initial requirement is to determine the sheet metal compatibility in the CAD setup you plan to purchase. However, no single CAD system can meet all your design needs, which is the fact that all of us must accept. In addition, some of the most advanced CAD systems available today may not be compatible with your current tools.
2022-08-08
Sheet Metal Design, You Need to Know These!
Sheet Metal Design Works, You Need to Know These! 1. Basic principles: a. The principle of uniform thickness of products b. Easy to Flatten Principle c. Appropriately select the thickness of sheet metal parts e. In line with the processing technology 2. Process requirements: A.Punching: ordinary punching and precision punching Note: Avoid narrow and long cantilevers and groove A with a thickness of not less than 2T.
2022-04-22
Difficulties in Aluminum Welding
Difficulties in Aluminum Welding https://sheetmetalxj.blogspot.com/ 1. Very easy to oxidize. In the air, aluminum is easily combined with oxidation to form a dense aluminum oxide film (about 0.1-0.2 thick) um) , the melting point is high (about 2050 ℃), far exceeding the melting point of aluminum and aluminum alloys (about 600 ℃). The density of alumina is 3.95-4.10g/cm3, about 1.4 times that of aluminum. The surface of alumina film is easy to absorb water. During welding, it hinders the fusion of base metal, and is very easy to form defects such as pores, slag inclusion and incomplete fusion, resulting in the decline of weld performance.
2022-04-09
Sheet Metal Wire Drawing
Wire drawing can be made into straight lines, random lines, threads, ripples and spiral lines according to the needs of decoration.
2022-04-09
