On the surface of some sheet metal chassis cabinets with poor quality, there are often sundries on the base, serious color difference, falling off of coating layer, paint flow, powder deposition and other conditions, which are actually caused by some mistakes in the sheet metal processing process of sheet metal chassis cabinets; The details are as follows:
Sundries on the bottom layer refers to the defect that the surface of the substrate is not treated and cleaned during surface treatment, which is the primary factor for the falling of the coating layer.
The main reason why the coating layer falls is that the adhesion between the coating layer and the substrate is not enough. The primary means to check the adhesion are impact test and cross cut test.
Exposed base material means that there is no coating on the surface, and the primary factor is missing spray and large-area scratch.
The factors of appearance scratch are relatively complex and run through the whole process of commodity production, but they can be roughly divided into two categories: one is the scratch of commodities during processing; The second is the scratch of logistics in the production process.
QUICK LINKS:>>>Sheet Metal Frame | Sheet Metal Housing | Sheet Metal Chassis | Metal Kiosk Enclosure | Sheet Metal Cover | Sheet Metal Parts Components | China Sheet Metal Manufacturer | Custom Sheet Metal Parts | Metal Enclosure Manufacturers | Sheet Metal Cabinet | China Sheet Metal Parts | Sheet Metal Bracket | Sheet Metal Parts Manufacturer | Custom Electrical Enclosures | China Sheet Metal Fabrication | China Metal Parts Manufacturer | Order Custom Metal Parts | Sheet Metal Machined Parts | Custom Machined Metal Parts | Internal Parts of ATM Machine | ATM Machine Parts | Sheet Metal Fabrication China | Aluminum Electrical Enclosures | Metal Manufacturing in China | Metal Enclosure Manufacturers | Sheet Metal Cover
